Products
Coating X300™ AF: Coating X300™AF provides high levels of water resistance and good moisture resistance for kraft paper. Coating X300™ AF protects food products from excessive moisture, freezer burn, and sticking. When diluted for mill application, it is an economical sizing agent. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.
Coating X300™ Plus: Coating X300™ Plus provides high levels of water resistance and good moisture resistance for kraft paper with improved water resistance over Coating X300™. Coating X300™ Plus protects food products from excessive moisture, freezer burn, and sticking. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.
FibreMax® 105B: FibreMax® 105B is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready, fiber treatment that increases the strength of paper and corrugated containers under humid conditions. FibreMax® 105B should not interfere with gluability.
FibreMax® 5000: FibreMax® 5000 is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready fiber treatment with the added benefit of water resistance. FibreMax® 5000 should not interfere with gluability.
FibreMax® 7040: FibreMax® 7040 is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready fiber treatment that increases the strength of paper and corrugated containers under humid conditions. FibreMax® 7040 should not interfere with gluability
HydraBan® 1000AF: HydraBan® 1000AF is an economical water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable.
HydraBan® 708: HydraBan® 708 is an economical, water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable. It can be applied at the wet end or dry end of the corrugator, or with an off-line treating operation.
MaxWhite® 17: MaxWhite® 17 is a white coating designed to offer excellent brightness before and after wax. This product is both hot melt and cold set gluable.
Michem® Coat 1547: Michem® Coat 1547 is a machine ready coating which imparts good water, grease and oil resistance to the substrate. This product is heat resistant enough to withstand corrugation and is cold set gluable as well.
Micryl™ 766R: Micryl™ 766R is a water and grease resistance coating that can also function as a low cost, heat resistant gloss overprint. In such applications, Micryl™ 766R can be applied to paper (non-clay coated), film or foil, either over or under glycol or wax-free inks. This product is gluable with cold set and hot melt glues.
Micryl™ 783: Micryl™ 783 is an excellent choice when a water and grease resistant coating is required and in-line coating is not possible. It imparts useful levels of gloss and ink protection. This product is gluable with both hot melt and cold set glues.
MillWhite™ 5: Mill White™ 5 is a general use white coating for non-waxed applications, which has been optimized for printability. This product is both hot melt and cold set gluable.
Nomar™ 70AF: Nomar™ 70AF is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar™ 70AF is typically applied to the inner package or to shippers and partitions. This product is gluable with both cold set and hot melt glues.
Nomar™ 70AFN: Nomar™ 70AFN is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small appliances. It is typically applied to the inner package or to shippers and partitions. It contains no fluorocarbon or PFOA. Nomar™ 70AFN is gluable with both cold set and hot melt glues.
Nomar™ 70THIN: Nomar™ 70THIN is a low viscosity, gluable, non-abrasive coating designed for flexo applications. It is generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar™ 70THIN is gluable with both cold set and hot melt glues.
Resisto Coat™ 39AF: Resisto Coat™ 39AF provides excellent, economical abrasion protection. It is used throughout the appliance industry as a protective finish on cornerposts and top pads. This product is hot melt gluable only.
Resisto Coat™ PLUS: Resisto Coat™ Plus is a low cost, dilute, non-abrasive coating. It is used throughout the appliance industry as a protective finish on cornerposts and top pads. Resisto Coat™ Plus is gluable only with hot melt adhesives. Cold set adhesives will not bond Resisto Coat ™ Plus.
RodWhite™ 962: RodWhite™ 962 is a white coating designed to be applied by rod coater. It offers excellent brightness on corrugated boxes with wax impregnated medium and hides wax bleed through at the flute tips. RodWhite™ 962 also provides oil and grease resistance and is gluable with both hot melt and cold set glues.
VaporCoat® 2200R: VaporCoat® 2200R is a coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.
Coating X300™ Plus: Coating X300™ Plus provides high levels of water resistance and good moisture resistance for kraft paper with improved water resistance over Coating X300™. Coating X300™ Plus protects food products from excessive moisture, freezer burn, and sticking. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.
FibreMax® 105B: FibreMax® 105B is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready, fiber treatment that increases the strength of paper and corrugated containers under humid conditions. FibreMax® 105B should not interfere with gluability.
FibreMax® 5000: FibreMax® 5000 is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready fiber treatment with the added benefit of water resistance. FibreMax® 5000 should not interfere with gluability.
FibreMax® 7040: FibreMax® 7040 is a new alternative to paraffin wax for treating medium. It is a repulpable, machine ready fiber treatment that increases the strength of paper and corrugated containers under humid conditions. FibreMax® 7040 should not interfere with gluability
HydraBan® 1000AF: HydraBan® 1000AF is an economical water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable.
HydraBan® 708: HydraBan® 708 is an economical, water based treatment for kraft paper. It imparts a high degree of water repellency, is printable and gluable. It can be applied at the wet end or dry end of the corrugator, or with an off-line treating operation.
MaxWhite® 17: MaxWhite® 17 is a white coating designed to offer excellent brightness before and after wax. This product is both hot melt and cold set gluable.
Michem® Coat 1547: Michem® Coat 1547 is a machine ready coating which imparts good water, grease and oil resistance to the substrate. This product is heat resistant enough to withstand corrugation and is cold set gluable as well.
Micryl™ 766R: Micryl™ 766R is a water and grease resistance coating that can also function as a low cost, heat resistant gloss overprint. In such applications, Micryl™ 766R can be applied to paper (non-clay coated), film or foil, either over or under glycol or wax-free inks. This product is gluable with cold set and hot melt glues.
Micryl™ 783: Micryl™ 783 is an excellent choice when a water and grease resistant coating is required and in-line coating is not possible. It imparts useful levels of gloss and ink protection. This product is gluable with both hot melt and cold set glues.
MillWhite™ 5: Mill White™ 5 is a general use white coating for non-waxed applications, which has been optimized for printability. This product is both hot melt and cold set gluable.
Nomar™ 70AF: Nomar™ 70AF is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar™ 70AF is typically applied to the inner package or to shippers and partitions. This product is gluable with both cold set and hot melt glues.
Nomar™ 70AFN: Nomar™ 70AFN is a water based, gluable, non-abrasive coating generally used to provide abrasion protection for gas flushed food packaging or small appliances. It is typically applied to the inner package or to shippers and partitions. It contains no fluorocarbon or PFOA. Nomar™ 70AFN is gluable with both cold set and hot melt glues.
Nomar™ 70THIN: Nomar™ 70THIN is a low viscosity, gluable, non-abrasive coating designed for flexo applications. It is generally used to provide abrasion protection for gas flushed food packaging or small appliances. Nomar™ 70THIN is gluable with both cold set and hot melt glues.
Resisto Coat™ 39AF: Resisto Coat™ 39AF provides excellent, economical abrasion protection. It is used throughout the appliance industry as a protective finish on cornerposts and top pads. This product is hot melt gluable only.
Resisto Coat™ PLUS: Resisto Coat™ Plus is a low cost, dilute, non-abrasive coating. It is used throughout the appliance industry as a protective finish on cornerposts and top pads. Resisto Coat™ Plus is gluable only with hot melt adhesives. Cold set adhesives will not bond Resisto Coat ™ Plus.
RodWhite™ 962: RodWhite™ 962 is a white coating designed to be applied by rod coater. It offers excellent brightness on corrugated boxes with wax impregnated medium and hides wax bleed through at the flute tips. RodWhite™ 962 also provides oil and grease resistance and is gluable with both hot melt and cold set glues.
VaporCoat® 2200R: VaporCoat® 2200R is a coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.
Corrugated - Perishables
